Close
Filters
Language
Search

ADHESIVES, SOLVENTS AND REMOVERS

View as Grid List
Sort by
Display per page

Ecostick ® 1816B

Water based adhesive ideal for leather and fabrics. Description / Nature of the product: Acqueous dispersion of a polymer based on polyurethane modified, ca.50% Application by: Spray gun, roller machine. Characteristics: Water based adhesive ideal for coupling leather, eco-leather, fabrics, covers, cardboards. Ideal for gluing PVC, EVA, nylon and ready made rubbers. Ideal for gluing greasy leather with presence of grease up to 15%. Instructions for use: Apply ECOSTICK ® 1816B on both sides. Let it dry. To work without preheating the adhesive, couple both sides within 20 minutes after drying and press. Otherwise, if this time is exceeded, reactivate at a 60°-70°, couple and press. The adhesive can be applied on one side to couple leather with textiles, moltoprene, foam rubber: apply plenty of ECOSTICK ® 1816B on leather or on material not so absorbing and couple immediately. Open Time: Cold bonding: up to 20 min. after the adhesive is dried. Reactivation by heating: within 48 hours. Specifications: Water based polyurethane adhesive at cold. It is possible to glue also with reactivation. Polymer yellowing proof. Packing: 10 kg

Ecostick ® 9030

Ecological water based adhesive for leather goods Description / Nature of the product: Modified poly-chloroprene latex, 50% c.a in water. Application by: Spray gun, roller machine. Characteristics: Ideal for coupling and folding leather, eco-leather, fabrics, covers, cardboards, for producing belts, uppers, bags, wallets, heels, orthopedic insoles and for assembling insoles. Instructions for use: Apply the adhesive on both sides. Let it dry until the film of adhesive becomes transparent. Couple and press. Open Time: Up to 2-4 hours, depending on the amount of adhesive used and on the kind of support. Specifications: Water based adhesive, does not leave spots, does not stiffen the leather and does not gum the needle in the seam. It is stabilized for spraying application. High tack on the surfaces, perfect hold on leather and synthetics. Quick drying and long open time. It can be used together with poly-chloroprene solvent based adhesives. Non toxic, non inflammable, non harmful. Remarks: If the open time is exceeded, bonding can be made after having warmed up at 60°C the material to bond. Packing: 10 kg

WATER-BASED ADHESIVE ECHO P 213

Low viscosity polycholoprene adhesive with good heat resistance and high initial tack. Materials: Leather, textiles, natural materials and some syntethics. Recommended on two sides. Application: by Spray. Reactivation: 45°C. Packing: 10 kg

WATER-BASED ADHESIVE ECHO PU 284

Water-based adhesive. High viscosity adhesive with high heat resistance. Materials: Leather, rubber, TR, PU, micro, PVC, Thunit, Nylon, polyester, ABS. Application: by Brush. Use: 2° hand. Packing: 10 kg

WATER-BASED ADHESIVE ECHO PU 277

Water-based adhesive. Medium-low viscosity adhesive with high heat resistance. Materials: Leather, rubber, TR, PU, micro, PVC, Thunit, Nylon, polyester, ABS. Use: 1st hand for absorbent materials. Application: by Spray – by Brush. Reactivation: 50-55 ° C. Packaging: 10 kg.

WATER-BASED ADHESIVE ECHO P 215

Low viscosity water-based polychloroprene with very short open time. Use: for leather. Suitable for latex based toe-ends. Packing: 10 kg